All parts of the coat

Size calculation of rear garment

- 1 centimeters) pverse thickness + seam consumption (PIN) 2. length line = (body length - bottom edge rib) * long straight line 3. body length = body length - bottom edge rib - hanging shoulder) * straight width 4. shoulder width needle = shoulder width * pverse seam consumption (needle) 5. shoulder length row number = hang shoulder length * straight density 6. shoulder hanging needle number = (1\2 chest number - shoulder width needle number) 27. 27. hanging shoulder needle method: after 3 3 to 6 needles, she needle generally reduces 2 needles per 2, at the height of centimeter to centimeter height, the number of receivable will be collected. 1. the needle at the bottom is = (1/2 chest circumference).

2. the number of the back necklines = the width of the back collar, the cross thickness and the seam consumption (PIN) 9.

The number of needles = (shoulder width needle number: the number of stitches in the back) is 210.. The number of stitches per row of the shoulder slope is equal to the number of single shoulder pins, the number of shoulders is high, the front part of the coat is 1., the needle at the bottom is = (1/2 chest + 1 centimeters) * pverse density + seam consumption (needle) 2. the number of rows is the same as that of the rear piece "2".

3. the number of long walks is the same as that of the last film "3".

4. the number of shoulder width needles is the same as that of the rear piece "4".

5. the number of the total number of hanging shoulders is the same as that of the rear piece "5".

6. the number of stitches on the shoulder is the same as that of the rear piece "6".

7. hang the shoulder to receive the needle method: may contrast the back piece, but the front piece is 1 centimeters more than the rear piece, the collection needle must receive more times than the latter piece.

Can be collected at the time of the 1 cm of the number of pins.

編織袖片時，它的直密和橫密與原密度略有差別：袖橫密=原密度×125%袖直密=愿密度×95%1.袖口起針=袖寬×2×袖橫密＋縫耗(針)2.袖長行數=(袖長－袖口羅紋長)×袖直密＋縫耗(針)3.袖根針數=袖根寬×2×袖橫密＋縫耗(針)4.袖身每邊應加針數=(袖根針數－袖口針數)÷25.袖身行數=袖長行數－袖山行數6.袖山行數=袖長高×袖直密×＋縫耗(針)7.袖山單側收針針數=(袖根針數-袖山寬針數)÷2領片1.領片針數=（領深×2＋后領寬＋2厘米）×羅紋橫密2.領片行數=領高×羅紋直密其它在做編織工藝時，有些規律性的尺寸關系及簡便計算方法可以借鑒：

1. generally, adult sleeves are less than 3 centimeters to 3.5 centimeters apart from their shoulders.

Sleeve width is less than 1.5 cm to 2 cm.

2. the cuff width of the men's shirt is 21 cm to 24 cm, and the cuff width of the blouse is 17 cm to 21 cm.

3. when knitting sleeves, if you add needles, you should speed up first and then slow. If you reduce the needle, slow down first and then fast.

4. the size of the sleeves of adults is usually 12 centimeters to 14 centimeters.

The number of stitches close to the 5. sleeves is close to that of the front and rear shoulders.

6. for knitting operation is simple, general neckline can not be considered.

7. the width of the back neckline is generally 1/3 with shoulder width.

The knitting size of each part of the undergarment is calculated. The knitting of the trousers is faster and more convenient. Generally, it is divided into two parts: the left and right trousers, plus a crotch block.

When weaving, if you start knitting from the waist of your trousers, the folding of the waist of trousers will be more effortless, but the trouser legs will be troublesome when they reduce the needles. Conversely, starting from the trouser legs, the waist of the trouser legs will be somewhat difficult. The trouser legs can be easily knitted and the waisted waistlines will be easier to knit.

This needs to be decided according to its specific circumstances.

Here are three knitting methods for a pair of trousers: two piece knitting.

1. waist needles = waist circumference 2

2. trousers long line = (trousers long waist rib).

Rib) * straight density

3. waist backward.

The rear warpage is generally about 3 centimeters higher, about 4~5 return routes (8~10 lines).

When knitting, take the waist width needle number, divide it into the front and back waist, then divide the number of the back waist by the number of return stroke (that is, 4~5 return trips).

If the needle is pulled from the trouser leg, it should be reduced by reduction.

。

4. hip width needle = hip circumference 2

5. the number of needles should be increased on the crotch: the number of buttocks and the number of waist width needles.

6. the length of the upper crotch = (straight crotch waist rib) * straight density.

7. the number of rows on the crotch plus the needle: the front side = the length of the upper crotch (the number of 1/4 on the crotch should be increased), the back side = the length of the upper crotch (3/4 of the upper crotch should be increased).

8. cross crotch pin = buttocks width needle + (front crotch width + rear crotch width) * cross thickness or cross crotch number = pverse crotch width * cross thickness.

9. trouser legs = (trousers long straight crotch - pants rib) * straight density.

10. the number of trouser legs should be reduced = the number of pverse crotch needles.

11. the number of trouser legs to reduce stitches is (= the number of trouser legs after 2- is less than that of crotch).

12. the number of crotch should be reduced after the crotch = the width of the crotch.

13. the number of the back crotch minus the needle line = the back crotch should be reduced by 2. If the knitting is started from the trouser legs, the "10", "11", "12", "13" and the "reducing needles" in the item should be changed to "adding needles", and the "additional needles" in the "5" and "7" items should be changed to "reducing needles".

Three piece knitting method (plus method)

1. the number of needles on the waist is the same as that of the two knitting method "1".

2. the length of trousers is the same as that of the two knitting method "2".

3. waist backward, and two weaving method "3" the same.

4. the width of the buttocks is the same as that of the two knitting method "4".

5. the number of needles on the crotch should be increased, the same as that of the two knitting method "5".

6. the length of the upper crotch is the same as that of the two knitting method "6".

7. the number of rows on the crotch is equal to (the number of the upper crotch is longer, the number of needles on the crotch should be increased) 28.

Row number = (trousers length straight crotch - Trouser rib) x 9. inch trouser legs should be reduced (Dan Ce) = hip width needle number - Trouser pin number 10. trouser leg minus needle interval number = trouser leg row number of trouser legs should be reduced needle 11. square box number = square width * cross density 12. block number = row length * straight density four piece knitting method four knitting weaving method and other knitting method is different: trouser legs reduce needles, each piece of trouser leg outside also need to participate in reducing needles.

　　平針編織褲前片1.腰口起針針數=(腰圍÷4-1)×橫密2.褲長行數=(褲長-腰羅紋-褲口羅紋)×直密3.臀寬針數=(臀圍÷4-1)×橫密4.上襠長行數=(直襠-腰羅紋)×直密5.前橫襠針數=前襠寬×橫密+臀寬針數+(本褲片第3項)6.褲腿行數=(褲長-直襠-褲口羅紋)×直密7.褲腿應減針數=前橫襠針數-前褲口針數8.褲腿減針間隔行數=褲腿行數÷(褲腿應減針數÷2)9.前褲口針數=(褲口寬÷2-1)×橫密平針編織褲后片。

1. the number of needles at the waist is = (waist circumference 4+1) * pverse density.

2. the length of trousers is the same as that of the front piece "2".

3. waist backward, and two weaving method "3" the same.

4. hip width needle number = (hip circumference 4+1) * pverse length 5. upper crotch long row number, and trousers front piece "4" the same.

6. rear pverse crotch number = rear crotch width * pverse density + hip width needle number (fourth pairs of trousers).

7. the number of trouser legs is the same as that of the front piece "6".

8. after the crotch should reduce the number of needles = the width of the crotch after the crotch is 9. after the crotch minus the number of needles: the number of the crotch after the crotch should be reduced the number of trousers should be reduced, the number of trouser legs should be 10., the number of trouser legs should be reduced = the number of pverse crotch needles - the number of needles in the back crotch should be reduced - the number of trouser pins 11., the number of trouser pins = (Trouser width 2 + 1).

In addition, waist rib and pants rib rib are smaller than other parts.

* straight density (excluding the inner side of the waist) 3. buttocks width = = (hip circumference 4-1) * horizontal crotch 4. straight crotch number = straight crotch * straight crotch 5. front horizontal crotch pin = front crotch width + pverse width + hip width needle (third pieces of trouser legs) = number of trouser legs = length of trousers, straight crotch row number, 7. trouser legs should be reduced needle = front pverse crotch number, front trouser pin number, trouser leg minus needle interval number = trouser leg row number (trouser leg should reduce needle number 8.). 1. the number of needles at the waist is = (waist circumference 4-1) x 2. tight trousers long trousers = trousers length.

Woven slacks

1. the number of needles at the waist is = (waist circumference 4+1) * pverse density.

2. the length of trousers is the same as that of the front piece "2".

3. waist backward, and two weaving method "3" the same.

4. hip width needle = (hip circumference 4+1) * pverse density

5. straight crotch line = straight crotch * straight tight.

6. rear pverse crotch number = rear crotch width * pverse density + hip width needle number (fourth pairs of trousers).

7. the number of trouser legs is the same as that of the front piece "6".

= the number of the crotch needles, the number of trouser legs, the number of needles in the rear crotch, the number of needles in the back crotch, the number of needles in the crotch, 11. the number of trouser legs, and the number of trouser legs. (= the number of trouser legs after the crotch is reduced) the number of men's trousers should be reduced. The number of 1. door knits is 1.: the number of 1. door buttons = the width of the door is 2., the number of rows is 2., the number of rows is 2., the number of rows is 2., the number of rows is 8., the length of the door is long. 8. after crotch should reduce the number of needles = the width of the crotch after the crotch is 9..

Knitted, when the number of lines needed for the length of the flap is enough, the number of the button is reduced.

When knitting the left trousers, if the knitted knitted knitted fabric is curled, the knitted fabric can be knitted to the position of the flap, and the number of pins is the same as that of the right trousers.