機械特點 1、本機專用于生產名類單色及混色鞋類制品，特別適用吹氣式鞋類制品。 2、原料適用于生產各種熱可塑材料，如TR、TPU及高發泡PVC。 3、本機采用世界上最先進的設計（專利保護），雙炮筒同時射出同時吹氣的一次成型二模/并且左右?？瑟?dú)立高干整射出量、射出力、吹氣時間。彌補了左右模腔因速度阻力不同而無法同時成型的缺點。 4、本機采用雙比便液壓控制，各類壓力流量轉速可精確的控制。 5、本機采用X、Y軸互動的原理設計，解決因模具進料口高度不同無法射出的問題；降低模具進料口的加工精度，接生了開發成本。 6、本機采用可編程微電腦控制器（PLC）與人機界面控制器（HMI）相結合，控制整機的流程使工作更加穩定，操作更加容易。 Featurrse: 1.This modelis specially in making single-clolr and mixed-color shoe soles,uppers and full injection molking shoes,etc.shoe products, especially in making air blown shoes products. 2.Various thermoplastic raw materials can be used,such as TR,TPU and high foaming PVC. 3.This machine uses the most advanced design in the world(copyright protect),two molds of full in jection molding with two shots and air blowing at the same time, to avoid failing in jection molding at the same time due to the difference of speed drag in the left and right molds. 4.This machine uses double proportional hydraulic pressure control and the rolling speed of flux with all kinds of pressures can be controlled exactly. 5.This machine uses principle de sign of X &Y axes interaction to solve the problems of failing in jection due to different height of molds infeed mouth.Then the processing precision of infeed mouth is produced and the exploitation cost is saved. 6.This machine uses PLC and HMI together to control all procedures of the machine.Then production is much more stable and operation is much easier.